Planetary Cooking Mixer Machine Is Used For Thicker Sauces And Foods

Writer：www.firemixer.com Time：2021-06-18 16:14 Browse：℃

Planetary cooking mixer machine is used for thicker sauces and foods
For viscous sauces or more special foods, we recommend that customers use planetary stirring cooking mixer machine with agitators, which are an "upgraded version" of ordinary sandwich pans, which are superior in terms of the amount of stainless steel material and the overall processing effect. The most important thing is that the planetary mixing system adopts a special tilt rotation to make the agitator fully contact the pot body, realize the non-integer rotation ratio of rotation and rotation, so that there is no dead corner in the pot and prevent the phenomenon of sticking pot.
 
Features of Industrial Planetary cooking mixer machine with agitator
1. Longze automatic food mixer cooking machine with stirring is suitable for a variety of spaces and is easy to disassemble: it has beautiful appearance, reasonable design, compact structure, convenient installation, simple operation and easy maintenance.
2. The world's leading mixing method: the mixing method adopts a special inclined transmission, and the planetary agitator used is in full contact with the pot body. The mixing system adopts a combination of rotation and revolution, and its transmission ratio is not an integer transmission ratio to ensure that there are no blind spots in the pot.
3. Clean and hygienic: use advanced transmission and sealing structure to make the transmission part and the pot clean and hygienic.
4. Convenient and easy to pour materials: The automatic/hydraulic type of this series of equipment uses hydraulic thrust to turn the stirring arm, without disassembly and assembly of the stirrer, and then uses hydraulic thrust to tilt the pot body, which is easy to enter and exit the raw materials and save manpower.
5. Good controllability: the use of a stepless frequency converter can uniformly heat high-viscosity products to increase heat. It has the characteristics of easy operation, high work efficiency, low energy consumption, long service life, compact structure, and convenient maintenance. Excellent blender.
Electric heating hot pot jacket kettles with agitator The installation method is tiltable, convenient for discharging, can be tilted to 90-95 degrees, manually shake the hand wheel to tilt, with tilt limit, to prevent excessive shaking. Equipped with pressure gauge, safety valve and electric control box. The electric control box can be made into two groups of controls, that is, the heating tube is controlled separately, so that the temperature control is more convenient, and the temperature can be adjusted at any time according to the product process to ensure the taste of the product. The equipment is tested and debugged before leaving the factory. After it is brought home, you only need to add the heat transfer oil to the 380V power supply and you can use it. There is an oil level gauge on the pot body, which can visualize the amount of heat transfer oil.
  
Industrial food cooking mixer machine operation and use:
1. Inspection equipment: The industrial mixer cooking machine with stirring equipment should be inspected before use. All control and operating parts should be in good condition, and the pan should be in a vertical state. Confirm that the supply gas is consistent with the type of gas indicated on the equipment nameplate. Clean the inside and outside with detergent. The surface can not be put into use until it is cleaned.
2. Adding materials: Add food, water, etc. to the pot.
3. Turn on the power: Press the "motor start" switch, the green button, and the stirrer starts to stir. Choose low speed first, and then choose high speed or low speed according to cooking requirements. It is strictly forbidden to adjust the speed of the reducer when the motor is stopped.
4. Burner ignition:
The first step is to confirm that the knobs on the operation panel, the long open flame knob and the ignition rod knob are in the fully closed position, and then open the main gas valve.
The second step is to turn on the ignition rod knob, ignite the ignition rod, and insert it into the ignition port at the lower part of the combustion chamber. At the same time, turn on the long open flame knob to ignite the long open burner.
The third step is to pull out the ignition rod, close the knob, and place the ignition rod in place.
The fourth step is to push down the knobs of the fire plate and turn them to the fully open position. At this time, the fire plate burner will ignite automatically. The inner ring burner should be used first, and the outer ring burner should be used after confirming that the combustion state is good.